Pages

06 July 2015

Goody Goody Binding Kit


It is common knowledge that a quilter is in need a lovely binding kit.
I bind more than a few quilts every year, so a portable binding kit is essential for me. Whether I'm out on the road or at home, no matter the size of the quilt, I use my binding kit for every single project.

I recently made this one using my new Gooseberry fabric (ships in October) and have gotten a lot of compliments and requests to share some of the construction details so I'm posting the tutorial here today.
I didn't invent the idea--I was inspired by my friend Amy and her fabulous Travel Sewing Kit. It includes additions like this zipper compartment to store binding clips. I am not a fan of sewing with zippers but this was EASY. If you've never sewn with a zipper, this is a great project for you.

Before we get started, let's take a look at some of the other features of this binding kit. 
In the center section of the kit, there is a thread holder for your favorite Aurifil thread spools, a wool felt rectangle for needles, and a sweet strawberry pocket for a small pair of scissors.

You'll also find a nice spacious pocket for anything else you might want to tuck in there for binding time. Here are a couple of my "essentials" (and the reason I call it my Goody Goody binding kit):

Let's get started. 

 MATERIALS NEEDED:
*Fabric is from my upcoming Gooseberry fabric line with Moda Fabrics (ships to stores October 2015). 
  • 1 fat quarter for exterior/interior panel B
  • 10 x 20” cotton batting
  • 1 fat eighth interior panel A
  • 1 fat quarter binding/exterior tie
  • 1 fat eighth zipper compartment fabric
  • 1 polyester zipper (9” or longer)
  • 1” square of Velcro
  • 1-3/4 x 2-1/2” rectangle of wool felt
  • 5” square HeatnBond Lite
  • 2 x 4" scrap for strawberry stem
  • Two 5 x 5” scraps for strawberry pocket
  • 10” square pocket fabric
  • 10” square thread holder/pocket binding fabric
  • Walking foot, for quilting
  • Zipper foot 
CUTTING:
Cut all pieces according to the cutting chart below and label according to each letter designation. 
CUTTING CHART
GENERAL ASSEMBLY:
 *Assume 1/4” seam allowance 
*RST means right sides together
Before you get started, check out this fun little video I filmed with Fat Quarter Shop. It shows a little about the binding kit, but mainly provides a video tutorial for step #2--how to sew the zipper compartment: 
1. Exterior Panel: Baste the "A" exterior panel to the batting. Using your walking foot, quilt with vertical lines 1/2" apart. Trim the excess batting and set aside for later.
2. Zipper Compartment: Bring 2 "G" zipper compartment rectangles RST with the zipper in between, aligning all raw edges to the LEFT side. (NOTE: The zipper is longer than the fabric intentionally--the fabric should be centered in the length of the zipper with the zipper-pull out of the way.) Glue or pin in place. (I love Elmer's school glue.) 
Install the zipper foot and move the the needle to the edge. Stitch next to the zipper teeth on the left side along the entire length of fabric. 
Flip the sewn rectangles wrong-sides together to the left side of the zipper teeth, press, and top-stitch next to the zipper. 
Repeat to the RIGHT side of the zipper--remember to move the needle accordingly. (Align raw edges on the right side of the zipper, pin or glue in place, and stitch next to the zipper teeth.)
Flip the sewn rectangles wrong-sides together to the right side of the zipper teeth, press, and top-stitch next to the zipper.  
Once you have top-stitched on the right side, mark a line across the top of the zipper.
The next part is very important to do in the right order. The first thing you must do is bring the zipper-pull down so it is within the fabric area. I REPEAT, PULL THE ZIPPER INTO THE MIDDLE OF THE FABRIC AREA BEFORE TRIMMING THE ZIPPER. Only then should you trim the zipper across the marked line at the top, and across the bottom.

Install the walking foot onto the sewing machine and reset the needle position to center. Bring unzipped teeth at the top together and stitch back and forth a couple times to keep the teeth together.
Fold the right-side of the zipper compartment under 1/4" and iron the fold in place. Align the zipper-compartment to the left-side of  the "C" (interior panel A) rectangle.

Using the longest stitch length on your sewing machine, baste the top, left, and bottom sides of the zipper compartment to the "C" (interior panel A) rectangle, leaving the folded edge unstitched.

3. Goody Pocket: Take the "I" pocket rectangle and fold in half, wrong sides together, and iron flat. 
Fold the "K" pocket binding strip in half, wrong sides together; press. Align the raw edges of the folded pocket and binding strip at the top. The binding strip is slightly longer than the pocket rectangle--just center the pocket with the folded binding strip.

Sew 1/4" away from the aligned raw edges.

Flip the folded edge of the pocket binding upward. Iron.

Flip the whole thing over, and apply Elmer's School Glue above the seam.

Bring the folded edge down to cover the seam from the front. Press in place.

Turn it back to the front of the pocket and "stitch in the ditch." (Stitch just below the binding, in the seam--this will catch the binding in the back.)  When you flip it over, you'll see the stitching came through to secure the folded end.

Place the pocket onto "B" (interior panel B) rectangle, aligning edges at the bottom. Using the longest stitch length, baste the left and right sides of the pocket to the "B" (interior panel B) rectangle.

Sew the pocket panel to the right side of  the "C" (interior panel A) rectangle using 1/4" seam allowance. Press toward "C."
4. Thread Holder: To the "J" strip, fold in one short-end 1/4” and press. Fold the strip in half along the length and press to make a crease down the center.
Fold the raw edges of each long side in to meet the crease in the center. 
Press the new folds, then re-fold in half at the center crease to conceal raw edges; press. Glue one Velcro snippet at the finished end. 
Top-stitch down both long sides and one short (the finished end), catching the Velcro snippet in the stitching to secure in place.
5. Strawberry Pocket: Download the Strawberry Pocket PDF here. (Make sure your printer setting is set to print it as an image at actual size--do not scale to fit.) Measure the 1" square to make sure it printed correctly.
Using a sunlit window or lightbox, trace the "stem" onto the paper-side of the HeatnBond Lite iron-on adhesive. 
Loosely cut out the paper shape and fuse the gritty-side onto the wrong-side of the stem fabric scrap following package directions. Cut out the "stem" tracing.
Cut out the "strawberry shape" template and trace onto the right-side of the strawberry fabric.
Peel the paper from the "stem" and arrange onto the "strawberry shape." Fuse in place with an iron.
Cut out the strawberry  and bring RST with the other strawberry fabric scrap. Sew 1/4" away from the edge of the strawberry shape, leaving 2" open in the side for turning right-side out.
Trim the excess, turn right-side out, and fold the raw edges inside. Press flat. Top-stitch along the stem only.
6. Interior Placement: Retrieve the thread holder, the strawberry pocket, other side of the Velcro snippet, and felt rectangle. 
Thread Holder: Place the (unfinished end of) the thread holder 3/4" to the right of the zipper pocket, the raw edge aligned at the top of the interior panel, making sure the Velcro snippet will face down. Stitch across the very top to keep in place. 
Velcro Snippet: Place the other Velcro-half 3/4" up from the bottom, 3/4" away from the zipper pouch. Glue in place and stitch in place. 
Felt Rectangle: Place about 3/4" down from the top, centered between the thread holder and pocket. Stitch around the perimeter to secure in place.
Strawberry Scissors Holder: Angle and place 3/4" up from the bottom, centered between the Velcro snippet and pocket. Stitch in place, leaving the majority of the stem-top open. 
A close-up to show the strawberry pocket stitched in place. (Leave the top open) Also be sure to backstitch at the beginning and end to really keep it stitched down.
Exterior Tie: Piece (2) 1-3/4 x 18" strips together to make one 1-3/4 x 35-1/2” strip. Fold the short ends in 1/4” and press. Fold the strip in half widthwise and press to make a crease down the center. (Sorry about the cropping--to be clear these are the ends of 1 strip.)
Open and fold the raw edges of each long side in to meet the crease in the center before refolding. Top-stitch closed. (This should be familiar since it is similar to the thread holder tie construction.)
Measure to find the center-point of the exterior panel. Find the centerpoint of the tie; align the two centerpoints. Topstitch the tie center in place, stitching back and forth several times to hold it firmly in place.

The next step is to sew the interior and quilted exterior wrong sides together (aligning raw edges) while also dividing the interior section into its three sections.
The first line is intended to stitch down the folded edge of the zipper pocket. To do this, identify the nearest quilted line on the quilter exterior and place pins at the top and bottom to mark. Quilt over the quilter exterior line designated. It should looks something like this:

NOTE: If there is not a quilted line from the exterior that is close enough to where the folded edge needs to be stitch, just topstitch the folded edge in place 1/8" in. 
The second line is intended to fall just outside/inside of the open pocket area. Find the nearest quilted line on the exterior and stitch over it. (Once again, you can always opt to stitch where you want if a quilted line from the back is too far away.) As you can see below, my closest line was just inside of the open pocket area. It would be just as acceptable to be a little outside of the pocket area.
Next, the final step is to bind the kit. Before doing this, I increased my stitch length to the max length and basted the exterior/interior together by sewing around the perimeter close to the raw edges. Finally, bind the two layers together. (I have a binding tutorial here for a reference.)
Fold the binding up and over to the interior and stitch in place by hand or machine, mitering the corners. And that's it! Just fold into thirds and tie.
 Stay tuned for a fun sew-along with Fat Quarter Shop. Use the hashtag #goodygoodysewalong and #goodygoodybinding kit to share your version with the sewing community.

63 comments:

  1. Love your binding kit it's really cute!

    ReplyDelete
  2. i adore this! so cute & functional!

    ReplyDelete
  3. Love this! Wish I had some yardage of Gooseberry to make this now!

    ReplyDelete
  4. So cute! Thanks for the great tutorial :)

    ReplyDelete
  5. This is perfect! Thanks for sharing!

    ReplyDelete
  6. This is wonderful and the perfect use for the Gooseberry layer cake I won in a Moda giveaway. There will be some piecing and patchwork to make those 10" squares work for all pieces, but I look forward to the process. :-)

    ReplyDelete
  7. Looking forward to trying this one.

    ReplyDelete
  8. This is too cute & could double as an embroidery kit as well. I am so going to make this for my next Fat Quarter Friends Swap! We've been swapping every month since April 2013. Anyway, I did have 1 question: Why is the outside panel 16.5" long & the inside panel is only 11.5" long??

    ReplyDelete
    Replies
    1. April-
      This is just a guess, but I think the 'goody' pocket is sewn TO the interior as opposed to ON it as the zipper pouch is. If you look closely at some of the pictures, I believe you can see the seam allowance.
      You are correct; this needs clarification.
      Hope this helps.

      Delete
    2. yes your completely correct, I made it and it seemed weird when I was making it but it finishes great

      Delete
    3. This comment has been removed by the author.

      Delete
  9. Can't wait to make one! Thanks for the free tutorial.

    ReplyDelete
  10. so stinking adorable! cant wait to make one (or six!)

    ReplyDelete
  11. How adorable and functional! I'm pretty sure I need this; a sew-a-long, how fun! Count me in.

    ReplyDelete
  12. So very cute! I would love you to make your tutorial into a pdf as my computer is no where near my sewing machine. LOL!

    ReplyDelete
  13. so cute I have never did anything with a zipper Thank you for making it easy to do!

    ReplyDelete
  14. Love it! Thanks for sharing the tutorial!

    ReplyDelete
  15. This is a fabulous tutorial... Thank you so much. I made one handy little binding kit tonight... but now I want to make another one.

    ReplyDelete
  16. What a fabulous kit!! I found it through Sherri McConnell's blog. Looks like I'll have to be following you now!! :-) Hugs, H in Healdsburg

    ReplyDelete
  17. This blog is so nice to me. I will continue to come here again and again. Visit my link as well.
    Good luck
    voyance gratuitement

    ReplyDelete
  18. I love this soooo much! Is there a chance that you will put it in a file so that we can download it and keep it? Thanks so much!!

    ReplyDelete
  19. I love this. It is so adorable. You are a genius to have come up with this idea. Can't wait to make one for myself and many for others I know will love it too. Thank you so much for sharing the pattern.

    ReplyDelete
  20. Love this kit and Love your shop name!! My mother's name is Lella and we NEVER see her name anywhere. I will definitely be following your blog!!

    ReplyDelete
  21. I was about to start this today and realized I had given away all my batting scraps! Any reason why I couldn't use fusible fleece (Pellon 987F) instead? I have plenty of scraps of that. Also, I use regular Coats and Clark thread for binding, do you think the bigger spools will make a difference in how the kit closes?

    ReplyDelete
  22. I saw your tutorial on Fat Quarter Shop's Jolly Jabber. I'm definitely going to make one of these for my binding clips. I haven't sewn a zipper in anything since 8th grade (and we're talking decades here!!). Thank you for the tutorial....

    ReplyDelete
  23. I am making one right now. Super excited. It would be helpful to know how big the zipper compartment is because it depends on how close you sew to the zipper. Does eac section break down into a third of the interior or is their adjustments for the folds/bulk?

    ReplyDelete
    Replies
    1. I didn't take note of the exact measurement, but there is definitely a little leeway. It does end up diving the interior panel into thirds, but as long as it's not drastically different it should be just fine.

      Delete
    2. Thanks! This was my question too. I now have the answer!

      Delete
  24. Oh, I'm lovin' this! I've already made one and plan on making a few more as Christmas gifts for special quilting friends. Thanks so much for your great tutorial :)

    ReplyDelete
  25. It’s really a nice and useful piece of info. I’m glad that you shared this useful info with us. Please keep us up to date like this. Thank you for sharing.
    voyance gratuite en ligne

    ReplyDelete
  26. Thanks for all of the details. It's super cute and really useful.

    ReplyDelete
  27. I really like this, and I plan to make some as Christmas gifts. Thanks for the pattern and tutorial!

    ReplyDelete
  28. What a great idea! Thanks so much for taking the super huge amount of time I know it takes to post a tutorial like this!

    ReplyDelete
  29. In the final steps of creating my own - using fabric from my stash. I used a laminated fabric, "Seaside Rose", by 3 Sisters for the exterior. It matches the portable design wall I madefrom a design by Deonn Stott . I can't wait to show it off to all my quilting (and non-quilting) friends. It's adorable. Thank you for sharing.

    ReplyDelete
    Replies
    1. Sounds like this project is the perfect companion to my UFO-to-Go portable design wall!

      Delete
  30. I have several questions:
    -Instead of wool felt can polyester felt be used?
    -Also how wide of velcro strip do i need to get? I know its suppose to be 1in long.
    -Should it be regular velcro or soft flex velcro?
    -Also I plan on making the "goody" pocket vertical instead of horizontal so when the kit is closed the stuff in the pocket won't fall out do you have any advice on how deep i should make the pocket or another idea such as having the pocket horizontal and adding something to it to keep the things in.
    -I was also wondering if there was any other simple shapes i could use for the scissor pocket....I don't think the strawberry would work with the theme in my kit.

    Any advice would really help I'm a newbie and would really love to make this kit and do it properly (sorry for so many questions). Thank you so much for the pattern its amazing.

    Thank you,
    Sydney H.

    ReplyDelete
  31. It is really adorable. Love the fabrics.

    ReplyDelete
  32. I'm a little late to the party but am making one today. Just need to bind it. Had lots of leftovers from the Wishes line so, I'm using them. Very cute! Thank You for a very cute bag.

    ReplyDelete
  33. This blog has a lot of friendliness and a warm welcome
    thank you very much

    voyance par mail gratuite

    ReplyDelete
  34. I saw a couple of these made up at a Guild Sew Day--so adorable! Perfect gifts for quilty friends, too!

    ReplyDelete
  35. There is a major cutting error in the cutting guide. The interior panel A should be cut to measure 7 x 16 1/2 and not 11 1/2.

    ReplyDelete
    Replies
    1. Hello! Actually, the interior panel A will be sewn together to interior panel B to get the 7'' x 16 1/2'' measurement. I hope that makes sense--thank you for writing!

      Delete
  36. This comment has been removed by a blog administrator.

    ReplyDelete
  37. I can't wait to make this! I'll be seeing my sister in two months and I told her we'll be making this kit!! :) Thank you for a great tutorial!!

    ReplyDelete
  38. Thank you for this tutorial! I just made two to give away for Christmas gifts and one for myself.

    ReplyDelete
  39. Thanks for the tutorial. I made a couple: https://grannymaudsgirl.wordpress.com/2015/12/16/binding-kits/. One for me and one to give away for Christmas.

    ReplyDelete
  40. Thanks for the great tutorial. A friend and I have each made one and I am really happy with the results. http://jannimary.blogspot.com.au/2015/12/final-finishes-for-2015.html

    ReplyDelete
  41. Thank you! I'm going to use it for my hexie projects.

    ReplyDelete
  42. This is so cute! I'm putting this on my to do list.

    ReplyDelete
  43. This is so cute! I'm putting this on my to do list.

    ReplyDelete
  44. Thank you very much for all your hard work. My kit turned out so well and I'm really proud of it. It's so cute and very useful! You are also sooooo pretty and I love your fabrics. Idk if I can find them any more (or at all) in Canada but it will become a quest!

    ReplyDelete
  45. I have a question... when you sew the two lines to connect the exterior and interior (right side zipper pocket and the top stitch on the "goody" pocket) do you sew over the tie on the front to hold it in place as well or do you pull it out of the way?

    ReplyDelete
  46. telasmosquiteira-sp.com.br

    telas mosquiteira
    telas mosquiteiro

    As telas mosquiteira sp , telas mosquiteiro sp garantem ar puro por toda casa livrando-a completamente dos mosquitos e insetos indesejáveis. As telas mosquiteira garantem um sono tranquilo a toda família, livrando e protegendo-nas dos mais diversos insetos. Muitos destes insetos são transmissores de doenças e a tela mosquiteira é indispensável no combate a mosquitos transmissores de doenças.

    A dengue, por exemplo, já matou centenas de pessoas só na capital de São Paulo e um pequeno investimento em nossas telas mosquiteiras podem salvar vidas. As telas mosquiteiras também impedem a entrada de insetos peçonhentos como as aranhas e os escorpiões, estes insetos também oferecem risco, pois seu veneno em poucos minutos podem levar uma criança a morte.
    telas mosquiteira jundiai
    telas mosquiteiro jundiai
    telas mosquiteira aplhaville
    telas mosquiteiro alphaville
    telas mosquiteira granja viana
    telas mosquiteiro granja vinana
    telas mosquiteira cotia
    telas mosquiteiro cotia
    telas mosquiteira tambore
    telas mosquiteiro tambore

    A chegada da temporada Primavera/Verão traz consigo a elevação da temperatura e a maior ocorrência de chuvas. Mas não é só isso. As estações mais quentes do ano causam muita dor de cabeça e muitos zumbidos indesejáveis em função das pragas urbanas – pernilongos, baratas, cupins e outros insetos -, que afetam todas as regiões brasileiras.

    Nossa missão é oferecer telas mosquiteiras de qualidade a um preço acessível, fazendo com que as telas mosquiteiras sejam uma opção viável para muitas pessoas.

    telas mosquiteiras Jundiaí
    telas mosquiteiro Jundiai
    telas mosquiteiras jundiai
    telas mosquiteiro industria
    telas mosquiteira restaurante
    telas mosquiteiro restaurante
    telas mosquiteira empresa
    telas mosquiteiro empresa

    ReplyDelete
  47. Such a great information on C Tutorial. Also helpful to search and full details on Java Tutorial. Thanks for it...

    ReplyDelete
  48. Thanks so much, I love this and NEED it! Your instrutions are great. So happy to have found your blog.

    ReplyDelete
  49. Thanks so much, I love this and NEED it! Your instrutions are great. So happy to have found your blog.

    ReplyDelete
  50. Thank you for your so cool post, it is useful, i love it very much. Please share with us more good articles.
    boutique paper bags

    ReplyDelete
  51. I really love what you do, bravo !!! Thank you for sharing this article with us.

    voyance gratuite par email

    ReplyDelete